JDTL desulfurization gypsum dryer

Dryer series
        The main products of our company's dryer series are: single-cylinder dryer, double-cylinder dryer. Three-cylinder dryer. Coal slime dryer, lignite dryer, pulverized coal dryer, iron powder dryer, slag dryer, gypsum dryer, river sand dryer, sludge dryer, compound fertilizer dryer , Indirect heating dryer, vertical dryer, tower dryer, oil heat conduction dryer, disc dryer, etc. Our company has a complete range of dryer products, and has continuously adhered to technological innovation for 30 years, making our dryer equipment at the leading level in the domestic industry.

JDTL desulfurization gypsum dryer

        The desulfurization gypsum dryer produced by Jidong Machinery Co., Ltd. adopts reasonable operating parameters. The coal consumption and electricity consumption are reduced by 10-15% compared with ordinary dryers, and the output per unit is increased by 10-15%. The desulfurization gypsum dryer is mainly composed of It is composed of rotating body, lifting plate, transmission device, support device and sealing ring. The dryer has the advantages of reasonable structure, excellent production and high output, and has been widely used in cement and mineral processing enterprises

JDTL desulfurization gypsum dryer performance and technical parameters
        When the material enters the desulfurization gypsum dryer for drying, different drying methods should be selected according to different materials. The calcination of gypsum is mainly divided into two categories: dry method and wet method, and the products produced are α gypsum powder and β gypsum powder. Now the commonly used equipment for gypsum production are as follows: desulfurized gypsum dryer, desulfurized gypsum briquette machine, continuous frying pan, internal heating tubular rotary kiln, fluidized furnace, airflow calcination, sand stone machine grinding, Peter mill fluidized bed Type calciner, etc., the equipment used is different for different processing techniques.

The main internal structure of JDTL desulfurization gypsum dryer
        In order to increase the good contact between the various parts of the material evenly distributed on the section of the drum and the drying medium, a lifting plate is installed in the drum. The types of lifts are as follows: lift-type lifts, four-format lifts, cross-shaped or frame lifts, sleeve-type lifts, and split-format (fan-shaped) lifts.

Main technical parameters of JDTL desulfurization gypsum dryer

        The series of new energy-saving dryers produced by our company have complete specifications and models. According to the diameter of the cylinder, they are Φ1.2m, Φ1.5m, Φ1.8m, Φ2.0m, Φ2.2m, Φ2.4m, Φ2.6m , Φ2.8m, Φ3.0m, Φ3.2m, Φ3.4m, Φ4.0m, etc. The length of the cylinder is 8m, 10m...35m and other specifications, and can also be produced according to the length of the user's needs; The transmission form is divided into right side and left side (viewed from the feeding end), and the transmission configuration on the right side is not specified in the contract; according to the bearing capacity, the transmission device has direct connection type and pinion assembly type; in order to facilitate transportation , installation, when the cylinder is long, it adopts split processing, on-site docking and integral type.